![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
VA72C10
![]() Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,269
|
6 Lug Cross drilled Disc conversion w/ drop spindles
600 FINAL OFFER plus shipping..... or if you pickup that is free
![]() For an extra 125 plus shipping I will include 2" front and 5" rear lowering springs. These were sold and paid for then when I went to ship them I found out I had lost a box so they are back up for sale.... Made to fit 67-70 1/2 ton chevy or GMC trucks and convert them from manual to disc brakes. http://www.earlyclassic.com/home.aspx Part #903-6770-DBC6CD runs 999 new plus shipping Comes Complete With 2 1/2" drop spindles, Calipers, Pads, 6 lug HD Rotors (CROSS DRILLED!!!), Bearings, Seals, Dust Shields, Dust Caps, Castle Nuts, Slotted Washers, Banjo Bolts, brake lines, and All necessary Hardware and Brackets. Kit originally came with master cylinder and prop valve but I lost that box somehow. I took that into consideration with the price as you can get the master and prop for under 100. Asking 700 FIRM (NOW 600!!!) Plus shipping. Everything is new in boxes. Save 300 off on new parts. I will accept paypal, but you MUST cover the fees. Shipping will be high due to weight...figure roughly 120-150 for shipping. I will deliver to VA/WV and surrounding states for a small fee. No actual pictures as parts are in the boxes. Note that the rotors are cross drilled. I can take pictures of the rotors if needed as I have opened that box to look at them. Picture below is from ECE. ![]()
__________________
Looking for a 67-72 swb or blazer project in or around VA. ![]() Last edited by VA72C10; 10-17-2009 at 01:17 PM. Reason: correct confusing wording about shipping |
![]() |
![]() |
Bookmarks |
|
|