Lowering/front disc advice needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bamafrost · 09-24-2009, 08:33 AM

Have a 68 C10 SWB and I want to lower it about 2.5 in the front and 4" in the rear. I was thinking dropped McCaughy's dropped spindles up front, and a $' BellTech coil drop in back. Need input please Don't want anything too radical that causes problems w/caster, camber, bad geometry. I didn't do very good in Geometry. hahaha

Can also use advice on who makes the best front power disc conversion kit. Thanks in advance for any help.. Thinking of putting either 16" AR IROC chrome replicas or 17" Coys (gunmetal ones) all around...truck will be silver/black.

Tom

09-24-2009, 08:33 AM	#1
bamafrost Registered User Join Date: Sep 2009 Location: Florence, Alabama Posts: 157	Lowering/front disc advice needed Have a 68 C10 SWB and I want to lower it about 2.5 in the front and 4" in the rear. I was thinking dropped McCaughy's dropped spindles up front, and a $' BellTech coil drop in back. Need input please Don't want anything too radical that causes problems w/caster, camber, bad geometry. I didn't do very good in Geometry. hahaha Can also use advice on who makes the best front power disc conversion kit. Thanks in advance for any help.. Thinking of putting either 16" AR IROC chrome replicas or 17" Coys (gunmetal ones) all around...truck will be silver/black. Tom



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.