The '69 Bites The Dust - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**LockDoc** · 09-28-2009, 06:19 PM

-
I am working on the final disassembly of the '69 C-10. The first picture is a year ago when I was driving it. The cowl and cab inner roof were really rusty so I decided to "borrow" some parts off of it for the '71 4x4. I finally decided to rip it apart and put the sheet metal from the blue '67 3/4 ton (third pic) on the '69 1/2 ton frame. I need a good truck to pull my new trailer with and I figure this will fill the bill. I was going to shorten the frame while I had it apart but I changed my mind, since I will be using it to pull the trailer and haul parts.

I will update this thread as I progress on this but there may be some delays. I'm working on a couple of other projects at the same time…

LockDoc

09-28-2009, 06:19 PM	#1
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,465	The '69 Bites The Dust - I am working on the final disassembly of the '69 C-10. The first picture is a year ago when I was driving it. The cowl and cab inner roof were really rusty so I decided to "borrow" some parts off of it for the '71 4x4. I finally decided to rip it apart and put the sheet metal from the blue '67 3/4 ton (third pic) on the '69 1/2 ton frame. I need a good truck to pull my new trailer with and I figure this will fill the bill. I was going to shorten the frame while I had it apart but I changed my mind, since I will be using it to pull the trailer and haul parts. I will update this thread as I progress on this but there may be some delays. I'm working on a couple of other projects at the same time… LockDoc Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.