1960 Automatic Conversion - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71stub · 10-01-2009, 08:41 AM

I am converting my 60 short fleet from a 4 spd manual to a 700R4 auto. I found a steering column and pedal assembly from a 64 GMC and I have a few questions. Is there anything else I need? My shifter is missing from the column and does anybody know if the shifter from a newer column will work? Or does somebody reproduce this? I would also like a picture of how the linkage is setup from the factory. I assume i will have to make some sort of bracket off the frame for it to pivot on like the 67-72's have. Thanks.

10-01-2009, 08:41 AM	#1
71stub Registered User Join Date: Mar 2008 Location: Forman, ND Posts: 365	1960 Automatic Conversion I am converting my 60 short fleet from a 4 spd manual to a 700R4 auto. I found a steering column and pedal assembly from a 64 GMC and I have a few questions. Is there anything else I need? My shifter is missing from the column and does anybody know if the shifter from a newer column will work? Or does somebody reproduce this? I would also like a picture of how the linkage is setup from the factory. I assume i will have to make some sort of bracket off the frame for it to pivot on like the 67-72's have. Thanks. __________________ 1971 Cheyenne Short Fleet - 468BB/TH400, Tilt, Tach, PS, PB 1967 Custom Short Fleet - 327/4spd



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.