|
10-10-2009, 10:48 PM
|
#17 |
|
Gettin It One Pice At A Time
Join Date: Oct 2004
Location: everett, washington
Posts: 2,688
|
Re: Quadrajet Help!
well, one thing you could do is take the line off and turn the motor till it pumps some out. it does not need a lot of PSI to run the motor, like 5 PSI. so don't be surprised if it does not come out like crazy. maybe have a cup ready so you don't spill it everywhere. that might make it easier to start knowing the gas has made it from the tank to the tube. just be patient with it, don't crank and crank and crank. go like 10 seconds then stop for 5 to keep from getting the starter hot.
__________________
RIP ELJAY   Work In Progress 1979 GMC C1500 Trailering Special. Getting the truck done, one piece at a time. “You can tell a lot about a fellow’s character by his way of eating jellybeans.”Ronald Reagan “I don’t know the key to success but I know the key to failure is trying to please everybody.” Bill Cosby Last edited by 79gmcc15; 10-10-2009 at 10:50 PM. |
|
|
| Bookmarks |
|
|
Threaded Mode