67 C10 327 PCV Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67chevylongbed · 10-14-2009, 06:13 PM

The truck was originally an Oregon truck so I don't think there would have been a PCV system on it originally. There is however a hose running from the back of the intake manifold and laying on the inner fender with exhaust coming out. Where is this supposed to be connected to, or can someone just show me how to hook the PCV up properly. It has an aftermarket 600CFM Holley 4 barrel electric choke carb.

The valve covers have no oil ports. The oil port is in front of the intake manifold.

Thanks ahead of time if anyone can help me out.

10-14-2009, 06:13 PM	#1
67chevylongbed Registered User Join Date: May 2009 Location: Carmichael, California Posts: 576	67 C10 327 PCV Question The truck was originally an Oregon truck so I don't think there would have been a PCV system on it originally. There is however a hose running from the back of the intake manifold and laying on the inner fender with exhaust coming out. Where is this supposed to be connected to, or can someone just show me how to hook the PCV up properly. It has an aftermarket 600CFM Holley 4 barrel electric choke carb. The valve covers have no oil ports. The oil port is in front of the intake manifold. Thanks ahead of time if anyone can help me out. __________________ Eric 1967 C10 LWB SOLD.... 1995 Ford F-250 4x4 Powerstroke, 342k "Each generation goes further than the generation preceding it because it stands on the shoulders of that generation. You will have opportunities beyond anything we've ever known." -Ronald Reagan



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.