fastest low budget sbc truck?

[hotrod 80]

Originally Posted by hotrod 80

$100 -2 bolt 350 638 tbi truck block (salvage yard)
$88 - used 2256 trw 4 relief forged flat tops ( ebay )
Free- powdered metal rods ( machine shop has a pile of them )
$35 - nodular iron vortec crank ( ebay )
$860- GM fastburn heads + rpm airgap(factory out of box except comp springs )
$211-650 speed demon (ebay)
$46-factory HEI with MSD board(ebay)
$65- used roller lifter set W/retainer and hardware (local recycler)
$450- machine work including balance (Jim's machine)
$239- XR288HR Kit
Lets just say $2250 with a gasket set and a new pump . Made 364 HP on chassis dyno ( which they all very ) and 501 hp on a mild N20 tune up .
Best motor pass was 11.65 @ 3000 #'s . I have over 250 passes on this combo and it is still giong strong . Will be spraying 250 this weekend with new slicks , hoping to get in the 6.60's

I will be duplicating this motor except the intake is now port matched and drilled and tapped for a fogger and putting it in a full size . I still have the top end and valve train . Oh , and it went 6.24 on 250 on a 275 drag radial @ 3018