The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 10-25-2009, 02:54 PM   #1
exmonkeypunk
Barrito Loco Diablo
 
exmonkeypunk's Avatar
 
Join Date: May 2008
Location: Cherry Valley, Illinois
Posts: 636
brake question (pedal to the floor)

I'm pulling my 72' GMC C/2500 into the gas station when my brake pedal goes to the floor and my brake light pops on. I swerved to miss the parked car at the other side of the pump and wiped out a few cones laying around before i was able to coax the 3/4 ton beast to a stop. I looked under at all the wheels and around the lines and saw nothing. I popped the hood to check the fluid level and there was a bunch of brake fluid that spewed from under the master cap. The levels were still full. I dried off the master top and put it back on. Still had no pressure. I have a front disc rear drum truck. Does this sound like a bad proportioning valve? I replaced my right rear wheel cylinder a few months ago but haven't checked the left, but haven't seen any fluid around the drum.
exmonkeypunk is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:44 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com