|
04-15-2003, 10:15 PM
|
#1 |
|
Registered User
Join Date: Jun 2001
Location: cambridge,ont,canada
Posts: 128
|
Milled Heads
I have a set of 441 Heads that were milled 20-30 thou. I plan to use these to replace my 882's! Do I have to get my stock Intake manifold mill too, or could I get away with thicker Head gaskets? Also, would these milled Heads have clearance issuses with the values (have stock pistons & cam).
I'm no expert, so any help would be appreciated.  
__________________
Nelson 1970 C10 350 Auto. A/C not Working |
|
|
| Bookmarks |
|
|
Threaded Mode