Headers for carbed LSx with dropmember?????? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BOOB · 10-29-2009, 12:48 AM

This is the only speedbump I've ran into with my carbed LS / Dropmember swap in my '70. Nate at Porterbuilt said that any F Body shorty will work... which I've found plenty of. I would like to use the Thorley's but people have run into clearance issues. As for the F Body headers, they all have a few sensor/emissions tubes welded in place. Although they could be capped, I would much rather them to not exist at all. Is anyone aware of a shorty like this? I dont mind plugging O2 bungs but those tubes are ugly as hell.

10-29-2009, 12:48 AM	#1
BOOB Registered User Join Date: Oct 2008 Location: Taylor, TX Posts: 95	Headers for carbed LSx with dropmember?????? This is the only speedbump I've ran into with my carbed LS / Dropmember swap in my '70. Nate at Porterbuilt said that any F Body shorty will work... which I've found plenty of. I would like to use the Thorley's but people have run into clearance issues. As for the F Body headers, they all have a few sensor/emissions tubes welded in place. Although they could be capped, I would much rather them to not exist at all. Is anyone aware of a shorty like this? I dont mind plugging O2 bungs but those tubes are ugly as hell. __________________ 1970 Short/Fleet C-10 (Project) -Slammed and Tubbed 1955 Cameo -Straight six, Turbo Hydro option 1955 BelAir 2 door post -All original down to the oil bath air cleaner 1964 Corvette -All power A/C 327 4 spd. tanker



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.