Stalls under acceleration - The 1947 - Present Chevrolet & GMC Truck Message Board Network

norske · 11-09-2009, 10:18 PM

Yesterday I was on my way home and got into the throttle a little (just enough to rattle the pipes) and it fell on it's face and killed. Started right back up and did it again. The third time it didn't kill but backfired (thru the carb?). It's a 305 with a mild cam, Edlebrock intake, RQJ carb, HEI diz with the vacuum advance hooked up to carb. Only thing I had time to check was the vac. adv. diaphram where I sucked on the hose and it held vacuum. Going to tear into it tomorrow and could use some ideas in advance. Thanx.

11-09-2009, 10:18 PM	#1
norske Registered User Join Date: Dec 2008 Location: Austin, MN Posts: 117	Stalls under acceleration Yesterday I was on my way home and got into the throttle a little (just enough to rattle the pipes) and it fell on it's face and killed. Started right back up and did it again. The third time it didn't kill but backfired (thru the carb?). It's a 305 with a mild cam, Edlebrock intake, RQJ carb, HEI diz with the vacuum advance hooked up to carb. Only thing I had time to check was the vac. adv. diaphram where I sucked on the hose and it held vacuum. Going to tear into it tomorrow and could use some ideas in advance. Thanx.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.