Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
11-15-2009, 02:41 PM | #1 |
low n' slo
Join Date: Mar 2009
Location: rosenberg, texas
Posts: 5,172
|
A Few Parts off my 67
I have piled up a few things i will not be using on my 67 suburban.
(1) 67 Hood..in decent condition. has some rust on the inside driver side, and few pinhole rust spots along the front edge. also has a few dings in it. it needs some work but can definitely be fixed. $30 (1) 67 Driver fender...also in decent condition. came off the same truck as the hood, it has the normal rust in the front cup, and a little in the rear corner behind the wheel arch. also has a small dent in the front. this fender can definitely be repairable. $30 (1) 67-72? Lower passenger side quarter bed patch. Brand new, never used. Bought from Classic Hearbeat, but i only used the driver side. $20 (1 set) 67 Front turn signal lenses, amber. They dont have any cracks but are weathered. IMO, driver quality. $5 (1) 67 Driver side mirror. Don't know why, but my truck only came with one mirror. It's in pretty good shape, no cracks in the mirror, just a smudge it looks like. I havent tried cleaning it. Has surface rust on the arm and back plate of the mirror, can blast or wire wheel it right off and be good as new. $20 Some free things also, i have the fender wells i took out but the passenger side has a lot of rust where the battery was, and i cut a small square out to get a stripped bolt out. Driver side is a lot better, but where the lines run through, i cut out because i didnt feel like disconnecting them. Also have front springs, the little spring cups, and 1 rear spring (i cut the other one to get it out).
__________________
67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____|__|__\__ ,.,,,.,.,,.,|_O _______ O_] Last edited by kev2809; 11-15-2009 at 02:45 PM. |
Bookmarks |
|
|