The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 11-15-2009, 10:23 PM   #1
292farmer
Registered User
 
292farmer's Avatar
 
Join Date: Nov 2009
Location: stoddard nh
Posts: 693
292i6 carburetor problems

ive got a 1972 c20 with the 292i6 and ever since ive got it about a month ago, it stumbles right after idle when press throttle and stumbles at higher rpms, me and my dad figured out it was the carb, we pulled it apart and the some idiot before had used some silicone? or some sticky gasket sealent that had actually spread into the jet and passages of the carb. we cleaned it out and it ran better but still ran lean, it runs perfect if we keep the chioke 3/4 on. we found the carb is off a a 1977 or later 292 and my dad remembers that those carbs ran leaner then those used on the early 70's so imwondering if any one know what size main jet were on the 77 and later monojet rochester mv and what size the 1972 main jets were? i cant afford a new carb so i want to increase the main jet to get it running smoother with out the choke on. it idles perfectly its just once it gets throttle it stumbles and runs lean, and yes i have replaced the fuel filter, and the pressure is 4psi after the fuel pump which im told is normal for i6. thank you for your help.
292farmer is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:08 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com