NJ Full Length Hedman Headers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Wild83C10 · 11-22-2009, 08:54 PM

I am selling used Hedman Headers. I used them for just over a year and a half. I cut off the cheaper Hedman ball flanges and welded on a set of Flowmaster Ball Flanges. There are three O2 sensor ports. One port has a plug and easy access for dyno sessions. These are the larger 1-3/4" primary diameter pipes for larger displacement SBC. You may need to ccut the inner edge of the frame a bit (1/4") for clearance down by the flanges. Let me know if there are any questions.
Please post in this thread first if you are interested.

Hedmen P/N: 69080
Link
Please check your application first (wont work with manual column shifter according to Hedman)

$200 shipped

11-22-2009, 08:54 PM	#1
Wild83C10 Registered User Join Date: May 2002 Location: NJ Posts: 910	Full Length Hedman Headers I am selling used Hedman Headers. I used them for just over a year and a half. I cut off the cheaper Hedman ball flanges and welded on a set of Flowmaster Ball Flanges. There are three O2 sensor ports. One port has a plug and easy access for dyno sessions. These are the larger 1-3/4" primary diameter pipes for larger displacement SBC. You may need to ccut the inner edge of the frame a bit (1/4") for clearance down by the flanges. Let me know if there are any questions. Please post in this thread first if you are interested. Hedmen P/N: 69080 Link Please check your application first (wont work with manual column shifter according to Hedman) $200 shipped __________________ 83 C10 Stepside (SOLD, it was a blast!) 383 MASS-FLO EFI/TKO II 600/3.90 Posi 10 bolt S475 and C4 DM running, fine tuning turbo= Douchebag Racing: Runs Fine all the Time Last edited by Wild83C10; 11-24-2009 at 10:19 PM. Reason: added pictures



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.