drop spindle problems - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**seafoam68** · 12-26-2009, 06:50 PM

Hey guys, need a little help. I ordered and installed 2-1/2" spindles from CPP,[URL="http://www.classicperform.com/Store/1960_1972_Chevy_Truck/CP4S1.htm"] These are on a '68 with stock a-arms with new ball joints. These spindles are supposed to use the stock balljoints, but the top joint on pass. side will not tighten up (run out of thread) I noticed CPP's web site shows the same spindle except for 70-72 models and I'm wandering if they sent me the wrong spindles even though the 67-70 spindle stock number is on reciet. I have also had issues with tie rod ends not matching up. Anyone been here before ? Thanks.

12-26-2009, 06:50 PM	#1
seafoam68 Senior Member Join Date: Oct 2009 Location: Chattanooga, TN Posts: 259	drop spindle problems Hey guys, need a little help. I ordered and installed 2-1/2" spindles from CPP,[URL="http://www.classicperform.com/Store/1960_1972_Chevy_Truck/CP4S1.htm"] These are on a '68 with stock a-arms with new ball joints. These spindles are supposed to use the stock balljoints, but the top joint on pass. side will not tighten up (run out of thread) I noticed CPP's web site shows the same spindle except for 70-72 models and I'm wandering if they sent me the wrong spindles even though the 67-70 spindle stock number is on reciet. I have also had issues with tie rod ends not matching up. Anyone been here before ? Thanks.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.