PCC shop truck on craigslist

[64shortc10]

Air bagged C10 project - $6000 (napa county)

--------------------------------------------------------------------------------
Date: 2009-12-31, 9:18AM PST
Reply to: sale-mke2n-1531855123@craigslist.org [Errors when replying to ads?]

--------------------------------------------------------------------------------


I'm sad to say it, but with too many projects going on I have no time for this truck any longer. I'm just trying to get out of it what I have in it in parts. What's included is the truck, it's in the exact condition as seen in the photos. The truck is registered as a 1967 and is currently registered as non-operational in the state of california.

What's done:
Truck is an original shortbed fleetside truck.
Many hours of chassis work done.
Frame rails are stock and all holes have been welded smooth and boxed
All body mount rivets have been ground out and mounts TIG welded on
Chrome Triangulated rear 4-link with Slam Specialties RE7 bags
Front crossmember raised 3.5 inches
Front crossmember moved foreward 1.5 inches and fully welded in
ART Strong arms in front with Slam Specialties RE7 bags
Belltech dropped spindles
Shock hoops and frame strengthening pieces begun fabrication in front
Tubular Rack and Pinion mount fabricated
Seat is re-upholstered in two-tone grey faux leather
Dash is half fabricated (wouldn't be too difficult to finish)
Passenger side firewall smoothed
Rebuilt tilt steering column
One-piece side windows installed
Power windows
Lays out on very tall 20 inch tire.
Solid centerline smoothies

What needs to be done:
Engine and transmission mounts need to be fabricated
Rack and Pinion placement needs to be fixed to avoid bump-steer
Shock mounts need to be fabricated and/or added
All plumbing needs to be done
Front bed mounts need to be fabricated
Rear wheel tubs/bed floor would need to be fabricated and/or modified original
Hood hinges need to be fabricated

What parts are included:
Everything seen in photos
New Painless Wiring harness to bolt into truck
(3) Viair Chrom 380 compressors
(2) polished 5 gallon stainless air tanks
Shortbed fleetside bed in good condition (no floor, had a wood floor no longer existent)
All pieces taken off of truck (it was a running driving truck)
Small block chevy engine (I don't know anything about it, it smoked when starting it up but ran good)
4-barrel intake and holley carb
Rebuilt turbo 350 transmission (I had it rebuilt when we tore the truck apart)
'50 Ford gauge cluster to fit in opening in dash with minor fabrication
Front end/hood pieces
Radiator, etc.

Very good price for a body dropped, air bagged C10 that you would be able to fit 24's on with little modification left.

Truck was featured in the August issue of street trucks magazine. More photos on our website, www.pacificcoastcustoms.com

Asking 6000.00 Truck is in pieces, so people looking to pick it all up only, not interested in shipping. It would be a great project for someone to start on in 2010. Could be finished rather quickly with enough time and energy.