TX Van tilt column, key on dash w/ wiring adapter - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**WIDESIDE72** · 01-03-2010, 04:36 PM

$125 + shipping.

The column is good and tight and the tilt mechanism works good. Included is the tilt column, plastic horn ring that mounts under the wheel, steering wheel nut, rusty turn signal arm and shift arm, neutral safety switch and adapter to go from the flat van wiring connector to truck half round connector. Basically all you will need to get going would be a steering wheel, gear indicator and tilt lever, if you were OK with the rusty turn and shift levers.

01-03-2010, 04:36 PM	#1
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Van tilt column, key on dash w/ wiring adapter $125 + shipping. The column is good and tight and the tilt mechanism works good. Included is the tilt column, plastic horn ring that mounts under the wheel, steering wheel nut, rusty turn signal arm and shift arm, neutral safety switch and adapter to go from the flat van wiring connector to truck half round connector. Basically all you will need to get going would be a steering wheel, gear indicator and tilt lever, if you were OK with the rusty turn and shift levers. Attached Images Last edited by WIDESIDE72; 01-04-2010 at 07:17 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.