NP205 Trans Case Mount - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kyoung · 02-13-2010, 04:06 PM

I have a 68 K10 that the previous owner has installed a NP205 and SM465 into. The transfer case had no poly or rubber mounts between it and the frame when I bought it, it was just bolted to the frame. I am putting in a new transfer case mount and am wondering exactly how it should be placed. Anybody have pictures of how their's is mounted? The assembly manual is no help on this one.

The mount has 4 poly pieces (2 bigger ones and 2 smaller ones) and a metal piece which has 2 big holes in it that the poly pieces fit into. Any ideas?

Thanks in advance.

02-13-2010, 04:06 PM	#1
kyoung Registered User Join Date: Dec 2006 Location: Alabama Posts: 66	NP205 Trans Case Mount I have a 68 K10 that the previous owner has installed a NP205 and SM465 into. The transfer case had no poly or rubber mounts between it and the frame when I bought it, it was just bolted to the frame. I am putting in a new transfer case mount and am wondering exactly how it should be placed. Anybody have pictures of how their's is mounted? The assembly manual is no help on this one. The mount has 4 poly pieces (2 bigger ones and 2 smaller ones) and a metal piece which has 2 big holes in it that the poly pieces fit into. Any ideas? Thanks in advance. Last edited by kyoung; 02-13-2010 at 04:07 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.