|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
02-13-2010, 05:16 PM
|
#1 |
|
Registered User
Join Date: Nov 2009
Location: Center, MO
Posts: 121
|
What are these brackets on my 66 3/4 ton frame?
Need some help with these. I think (correct me if I'm wrong) the first bracket is for the clutch linkage, but I don't know what the second picture is. I'm about to prep my frame for paint, and want to go ahead and remove any unnecessary stuff (i.e. factory exhaust hangers, rear cab perches I'm replacing with 1/2 ton perches, etc.). I don't need clutch linkage - going to NV3500 with hydraulic clutch.
I removed all of the park brake cables, and they didn't use it, is it another exhaust hanger? Thanks for any help. The first bracket is on the driver's side of frame, forward of the tranny crossmember. Second bracket is on driver's side of frame, about halfway between the tranny crossmember and the carrier bearing crossmember.
__________________
GMCMG 1964 GMC 1/2 ton LWB project - 1982 GMC 6.2 diesel engine/suspension donor - 1966 Chevy 3/4 ton frame/doors/fenders donor - tons of parts - cause you can't build a truck without 4 of everything! 2001 3/4HD Duramax Diesel extended cab lwb4x4 1984 Chevy C30 6.2 diesel lift truck (project) 1962 GMC w/5 lugs, 350/350 auto (was for parts, but couldn't bring myself to do it!) glascock.m@hotmail.com |
|
|
| Bookmarks |
|
|
Threaded Mode