Where to get extended Ubolts for lowering blocks? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Leviticus · 02-16-2010, 07:51 PM

Hey guys,

Having my buddy fab me some 2" lowering blocks for my 72 C10 and I was wondering if anyone knew if there was a U bolt that was the right length, diameter and bend to install with the blocks that is for a different application?

I think its going to need to be about 10.5-11' from the top of the bend to the bottom of the threads. My buddy can make me a set, but he is busy and did me a favor to fab the blocks for me today but has to order more stock to make the bolts. And I am an impatient bastard and want the U bolts now lol.

Thanks guys!

02-16-2010, 07:51 PM	#1
Leviticus Shake and Bake! Join Date: Feb 2010 Location: Central Coast, CA Posts: 609	Where to get extended Ubolts for lowering blocks? Hey guys, Having my buddy fab me some 2" lowering blocks for my 72 C10 and I was wondering if anyone knew if there was a U bolt that was the right length, diameter and bend to install with the blocks that is for a different application? I think its going to need to be about 10.5-11' from the top of the bend to the bottom of the threads. My buddy can make me a set, but he is busy and did me a favor to fab the blocks for me today but has to order more stock to make the bolts. And I am an impatient bastard and want the U bolts now lol. Thanks guys! __________________ "All tyranny needs to gain a foothold is for people of good conscience to remain silent." Thomas Jefferson "You are remembered for the rules you break." General Douglas MacArthur "Support Our Troops And The NRA"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.