SC Suicide Doors suspension and frame

[2wd73blazer]

This is a swb frame. I believe it came from a 70 but it could have been 69. It has the SD P-47 front crossmember, SD tubular upper and lower control arms, SD rear wishbone lift kit, Belltech lowering spindles, Dominator 2600 air bags at all four corners, and new power rack and pinion from Summit. The rear end is a posi trac. The frame was sandblasted and painted with SEM Rustshield prior to installing the suspension parts so it will need to be repainted. This frame will lay on the ground. The rear kit is not fully installed. You need to install the motor and trans so you can set the pinion angle before welding the rear arm brackets on the rear end. $3300.