![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Shake and Bake!
![]() Join Date: Feb 2010
Location: Central Coast, CA
Posts: 609
|
Having some issues with cooling fan clearance. Recommendations?
Hey guys,
So I finished installing my GM Performance Products serpentine kit on my 72 C10 with a 350. The issue I am having is I can't get the fan shroud back in because the water pump (Long Pump) sticks out too far. I may be able to trim it but would prefer not to. I was going to go with a flex fan, but without the shroud I am worried it won't be efficient enough. So I started looking into doing an electric fan and was looking at the Taurus fan setup, but I only have about 4.5 or a little under inches between the radiator and the front face of the water pump pulley. And the guy who installed his says it was about 5.5 inches deep. So I am trying to figure out which way to go without breaking the bank. Anybody else run a different electric fan that fits that's not really pricey? Thanks guys, I really appreciate your help.
__________________
"All tyranny needs to gain a foothold is for people of good conscience to remain silent." Thomas Jefferson "You are remembered for the rules you break." General Douglas MacArthur "Support Our Troops And The NRA" |
![]() |
![]() |
Bookmarks |
|
|