|
03-13-2010, 08:03 PM
|
#1 |
|
Check The Champ, Demonstrator
 
Join Date: Jun 2009
Location: Montreal,Quebec
Posts: 6,627
|
XKUT Tie Rod Reamer
My K10 steering rod ( drag link ) is not available so I'm going to covert it to the 67-91 double tie rod with sleeve set up. The new tie rods have a larger diameter taper so I'm going to ream the openings to accomadate the new tie rods. They are the same 1 1/2" taper per foot as the old drag link. Willing to share the reamer after I'm finished. The small end of the reamer is 7/16" and the large end is 1".
http://www.xkut-reamers.com/servlet/StoreFront
__________________
1963 Chevrolet Truck Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original Chevrolet Truck Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1 |
|
|
| Bookmarks |
|
|
Threaded Mode