NC Un needed parts: Manual steering gear, Sway bar brackets, & 6 lug 15x6 wheel - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**NC67Chev** · 03-17-2010, 06:16 PM

Here's a couple of things that I'm not going to use, so I thought I would see if anybody needs/wants them.

The manual steering gear came off of my 67, has 77k miles on it, and seems to be very tight. I'll take $15. Sold

The wheel is 15x6 and has a backspacing of 3 3/4" (it was an oddball in some that I picked up to swap out for my drum wheels. I'll take $10.

The sway bar brackets came with a bar that was pulled at a local yard. I'm going to put the shorter ones on for future lowering, so I'm not going to use them. You will notice that the one on the right has been broken and welded at some point. I'll take $5. Sold

03-17-2010, 06:16 PM	#1
NC67Chev Senior Member Join Date: Oct 2009 Location: Greensboro, NC Posts: 698	Un needed parts: Manual steering gear, Sway bar brackets, & 6 lug 15x6 wheel Here's a couple of things that I'm not going to use, so I thought I would see if anybody needs/wants them. The manual steering gear came off of my 67, has 77k miles on it, and seems to be very tight. I'll take $15. Sold The wheel is 15x6 and has a backspacing of 3 3/4" (it was an oddball in some that I picked up to swap out for my drum wheels. I'll take $10. The sway bar brackets came with a bar that was pulled at a local yard. I'm going to put the shorter ones on for future lowering, so I'm not going to use them. You will notice that the one on the right has been broken and welded at some point. I'll take $5. Sold Attached Images __________________ 1967 Chevy C-10, 250 L6, Powerglide, 3.73, SWB, Fleetside Upgrades: Power steering, Offset air cleaner, Rear Sport bumper, 3 point safety belts, HEI, -1/-2 springs, 16x5 wheels, McGaughy's disc brake conversion, Sway bar Last edited by NC67Chev; 03-20-2010 at 05:15 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.