![]() |
![]() |
#7 |
Registered User
Join Date: Oct 2005
Location: Overland Park, Ks.
Posts: 5,217
|
Re: t5 troubles...?
you have to grind the grooves in the splines on the input shaft back about 3/8 to 1/2 in. I put the disc on the shaft till it won't go any further. I mark where it stops & pull it back off. Then i grind the grooves with a die grinder or cuttoff wheel. Try the disc till it will slide back far enough from the marks. You have to remove the brg retainer & cover the front of the trans. to keep the fillings out.
|
![]() |
![]() |
Bookmarks |
|
|