Air Bag It Suspension

[3rdgeneration]

N2TRUX: I am not sure if you are referring to any of my post, but I have not compared CPP to AIM at all. The only reference I made to CPP was that I talked to Jeff about their rear 4 link kit. Jeff was very helpful and with research on the forums here, their quality does seem to be good. As far as buying from Air Bag It, I simply wanted to ask for personal experience from board members and I greatly appreciate your input because you have personal experience with their service (or should I say lack of service).

As far as the current suspension on the truck now. It has a rear flip kit with all remaining leafs in place, but it does not have the shock extender brackets, which would probably help. Up front it has 2.5inch drop spindles and 1inch lowering springs with one coil cut out. The front is not too bad, the rear bottoms on the non c-notched frame horribly and that is the issue. I could simply extend the shock travel and c-notch the truck and improve things, but I instead will be changing to a 4 link of some sort.

I will be calling suicidedoors and see what they can put together for me. Welding is not a problem so that might help, but I do not want to alter the bed floor or wheel wells at all.