![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
GM ONLY BABY!!!
Join Date: Oct 2003
Location: Fort Wayne, IN.
Posts: 1,998
|
Anyone completed the LS swap yet?
I have been doing a lot of searching and reading, and haven't found anyone who has completed the LS swap in out trucks. The one fellow board member has the bad a$$ orange truck, but not much info about it. I have found that I will need 98 F body exhaust manifolds in order to make it fit. I have a 01 6.0 LQ4 that I want to install in my 72 GMC. I currently have a 355 sbc with 200 4R trans. I would like to run a 4L60 with the 6.0, but the ECM that came with motor is for a 4L80 4wd. I'm just looking for some advice and knowledge about rounding up parts before getting started. I want to get info about the fuel pump, and running a return line. I have a Summit tank under the bed, now. I know I have to have at least 58 psi. I'm wanting to know if maybe my driveshaft will work with a 4L60, and what kind of linkage I will have to use to shift it? I also want to know which sensors are what so that I can hook them up to gauges. I have a complete 6.0 LQ9 with ECM, starter, p/s pump, a/c compressor, alternator. Will the a/c compressor work with my converted R134 system? Will the p/s pump work with my original steering box, maybe have to get hoses made. Thanks guys!!
__________________
2 wrongs don't make a right, but 3 lefts do. 66 Chevelle Malibu 406ci, 573hp, 10.99@121mph 96 Chevy Silverado Z71 72 GMC 1500 Super Custom LS 6.0/4L65 on airride ![]() ![]() http://www.cardomain.com/ride/707879...mc-c-k-pick-up Last edited by chevydog66; 05-31-2010 at 08:44 PM. |
![]() |
![]() |
Bookmarks |
|
|