![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
1970 Daily Driver
Join Date: Jun 2007
Location: Glenns Ferry IDAHO
Posts: 1,037
|
Trying to get a trailer looking good enough to pull behind the "ol" 70. Need Advise
I am repainting a jet-ski trailer that is in great condition except for little rust spots all over the place making it look like crap. I used one of those green bristle discs on a mini air angle grinder. Those green bristle discs eat right through the rust and affected paint no problem. Now instead of a rust pock marked trailer I have little patches of exposed metal allover. Can I just feather out the bare spots instead of sanding down the whole dang trailer? I am thinking that even though I have the spots down to shiny metal that I would spray the areas with a rust conversion product to make sure the rust does not come back to haunt me. I would like to rattle can a coat of primer and have the trailer all ready for a friend that has agreed to spray a finish on it for me if I have all of the prep work done.
So my questions are. 1) Am I going about this the right way or should I do something different? 2) Is there a good rattle can primmer that I can use? Primer sealer? 3) For a finish coat should I use epoxy paint or something else.
__________________
It's not truly yours if you didn't build it yourself or if you don't do your own maintenance. Last edited by lts70; 06-01-2010 at 01:15 PM. |
![]() |
![]() |
Bookmarks |
|
|