Quadrajet info needed. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Slofarmtruck · 06-18-2010, 08:56 PM

When I bought my truck I just threw a new edelbrock carb on to ease the resurrection of a sitting for 10 years vehicle. I also removed all the emissions components that I could. I later figured out that due to the faulty gas gauge the truck was out of fuel. The truck runs good now. With that said I am going to try the quadrajet back on the truck again. My question for all you experts is, what vacuum ports can I block off on the stock quadrajet and which one is my vacuum advance for the distributor? Pictures are greatly helpful and appreciated.

06-18-2010, 08:56 PM	#1
Slofarmtruck Registered User Join Date: Feb 2010 Location: Waukesha, WI Posts: 162	Choke Temp switch help! When I bought my truck I just threw a new edelbrock carb on to ease the resurrection of a sitting for 10 years vehicle. I also removed all the emissions components that I could. I later figured out that due to the faulty gas gauge the truck was out of fuel. The truck runs good now. With that said I am going to try the quadrajet back on the truck again. My question for all you experts is, what vacuum ports can I block off on the stock quadrajet and which one is my vacuum advance for the distributor? Pictures are greatly helpful and appreciated. Last edited by Slofarmtruck; 06-19-2010 at 10:11 PM. Reason: change title



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.