Need advice on 1 pc drive line. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

imdarren · 05-25-2003, 05:58 PM

Looking at the posibility of installing a 1 pc drive line on the 67 C10 Long Wheel Base W/ a 350/350.
Some questions.
1) Will I need to cut the hole in the rear cross member larger?
2) If so, how much?
3) What Make / Model / Year makes a good drive line donor?
4) Anything else I will need to know to pull this off . . . . ?
If I do need to do any cutting etc. I will need to do it before the frame gets powder coated.

Thanks for the help.

Darren

05-25-2003, 05:58 PM	#1
imdarren Registered User Join Date: Oct 2001 Location: SW Washington Posts: 1,006	Need advice on 1 pc drive line. Looking at the posibility of installing a 1 pc drive line on the 67 C10 Long Wheel Base W/ a 350/350. Some questions. 1) Will I need to cut the hole in the rear cross member larger? 2) If so, how much? 3) What Make / Model / Year makes a good drive line donor? 4) Anything else I will need to know to pull this off . . . . ? If I do need to do any cutting etc. I will need to do it before the frame gets powder coated. Thanks for the help. Darren __________________ Washington State 1967 Chevy C10 LWB Rodstoration In Progress. 1972 K20 Cheyenne Super



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.