TH350C to TH350 non lock up
Ok so here is my situation. I bought a TH350C not knowing what it was and went to put it in my toy and that is when i found out that it will not work with my stall convertor because of the O-ring on the input shaft I would have to buy a lock up convertor and for a stall one im looking at around 500 or more. I could have my tired one rebuilt for less than that. So I was just talking to a tranny guy and he metioned that I could have the front pumps and shafts swapped from my old one to the 350C. Then i would be able to use my $700 paper wieght finally. Does anyone know how involved this is or any experience with it. Is it something I could do in my garage or do I need to pay the 300 to have a shop switch them? THanks guys and gals
__________________
"Buckle up I wanna try somethin!!"
"of course it will hold!, I welded it!"
1977 c10 under knife for full rebuild, 5.3l 4l60e drive rain swap, replacement frame and green repaint
|
06-24-2010, 11:50 AM
Threaded Mode