What did you do to your truck today! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Lippyp · 06-28-2010, 01:15 PM

Stripped the old intake off and got the edelbrock performer EPS installed and then ran into a snag with the HEI not fitting.

This

to this

Just got to sort out if I can fit a stock HEI or whether I need to convert the twin point mallory to electronic with an external coil and then finish cleaning up and painting all the odd little brackets etc and refit them. I've even got a cool little direct mount moon temp guage to go in one hole on the manifold. The Mickey T valve covers are getting soda blasted as we speak and then I can either polish or paint them.

06-28-2010, 01:15 PM	#11
Lippyp English Chevy Owner Join Date: May 2002 Location: Shropshire, UK/ Lot, France Posts: 1,848	Re: What did you do to your truck today! Stripped the old intake off and got the edelbrock performer EPS installed and then ran into a snag with the HEI not fitting. This to this to this to this Just got to sort out if I can fit a stock HEI or whether I need to convert the twin point mallory to electronic with an external coil and then finish cleaning up and painting all the odd little brackets etc and refit them. I've even got a cool little direct mount moon temp guage to go in one hole on the manifold. The Mickey T valve covers are getting soda blasted as we speak and then I can either polish or paint them. __________________ Phil '67 C10 long fleet. 350/TH350, 4 bbl Carter, K&N, Dual exhaust, loads of stuff coming soon 2001 S10 Blazer Daily Driver, bone stock 4 door 4x4 with manual transmission



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.