![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
English Chevy Owner
Join Date: May 2002
Location: Shropshire, UK/ Lot, France
Posts: 1,848
|
Stock ignition coil location
OK so now I've gone with a pertronix conversion kit for the Mallory I'm stuck with an external coil (Pertronix flamethrower in black so it blends in with the firewall) You can see from the attached picture where the old coil was located and although I get to lose the external ballast resistor I want a more discrete location and it needs to be mounted vertically to avoid the coil overheating. Where was the stock coil located? If I can't fit it there anyone got any ideas of a good place to mount the damn thing so its a bit more out of sight? I'm happy to get longer leads if I need to.
![]()
__________________
Phil '67 C10 long fleet. 350/TH350, 4 bbl Carter, K&N, Dual exhaust, loads of stuff coming soon 2001 S10 Blazer Daily Driver, bone stock 4 door 4x4 with manual transmission |
![]() |
![]() |
Bookmarks |
|
|