Need help with disc brake swap

[1965 Tuned Port]

Here is the problem . I have a 65 1/2 ton I am putting disc brakes on . I used 85 3/4 ton lower control arms with new ball joints . Installed the correct ball joints in the upper control arms . The spindles look like the ones on a 90 pick up with 6 lug rotors . The problem is that the top of the wheel is tilted out . I have removed all of the shims and even the washer like spacers and the wheel is still tilted out to far . Also the stops on the spindles are so short that they never hit the stops on the control arm . What do you think ? Did I get some odd ball spindles ? I got the spindles , rotors and calipers at a swap meet so I am not sure what they came off of .