|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
07-25-2010, 07:49 AM
|
#1 |
|
Retired Air Force Veteran
 
Join Date: Aug 2007
Location: Pembroke Pines, Florida 33024
Posts: 1,808
|
steel braided brake lines and fittings
i am interested in running steel braided brake lines. i already have replaced my 3 rubber lines with steel braided lines. i'm talking about some of the hard line (i'll keep the long hard line on the frame rail) but connecting into it such as in going to the master cylinder and prop valve and then split between the 2 front rotors and then in the rear say from the hard line to the tee. i think the rear is 3/8" which is equal to AN-6. does anyone know what the smaller lines in the front are?
__________________
Harry 69' SWB Step Side 1/2 Ton w/68' Front Clip Swap from Leafs to Trailing Arms (Complete) Swap 6 Lug to 5 Lug (w/ Disk Brakes in Front) 3/6 Drop  Help Support The Board Click Here For Information On How To Subscribe Krue's FAQ Page Vendors |
|
|
| Bookmarks |
|
|
Threaded Mode