|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
08-03-2010, 09:49 AM
|
#1 |
|
Retired Air Force Veteran
 
Join Date: Aug 2007
Location: Pembroke Pines, Florida 33024
Posts: 1,808
|
Step Side Fender Removal
I am trying to remove the step side fenders. I used PB Blast on the nuts inside the fender wall. They all turn - but only so far. Now the Phillips Head Bolt inside the bed is turning. I tried to keep it from turning with a screw driver while using a socket to turn the bolt - no go. I am having some welding repairs done and it would be much easier to weld if I remove the fenders. If I cut the heads off pull the fenders off that way, is new hardware to reattach the fenders available/where?
Thanks
__________________
Harry 69' SWB Step Side 1/2 Ton w/68' Front Clip Swap from Leafs to Trailing Arms (Complete) Swap 6 Lug to 5 Lug (w/ Disk Brakes in Front) 3/6 Drop  Help Support The Board Click Here For Information On How To Subscribe Krue's FAQ Page Vendors |
|
|
| Bookmarks |
|
|
Threaded Mode