**HELP!!** A-frame of 67 c10 help please!?!?!?!

[charx2]

I have almost finished a job of replacing a bent x-member. I have everything all together now but here is the thing, the pass side lower a-frame is either bent, or the trucks are supposed to be like this. The drivers side upper ball joint is about 2-4" behind(towards the cab) the lower ball joint. Now the pass side upper ball joint is directly above the lower ball joint. Can anyone please help me with this?? I have the lowers on the notch on the x-member so i'm pretty sure it's either bent or supposed to be like that. I took some pictures which give you a idea.
Passenger side

Drivers side

Both were taken with the same settings and camera aimed the best I could at same spot, that is the difference between the left and right side, PLEASE HELP/ADVISE!?!?!?
BTW, both are shimmed the exact same amount as well so in my book they should be even, just does not seem right. Thanks fellas.