|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
08-08-2010, 10:45 AM
|
#1 |
|
Retired Air Force Veteran
 
Join Date: Aug 2007
Location: Pembroke Pines, Florida 33024
Posts: 1,808
|
Instument Cluster w/ Tach Question
I have just finished assembling an Instrument Cluster and have put in a Factory Tach that I picked up in Carlisle this past April. The Big Question......I have an after market wiring harness and can wire the gauges up seperatly. I have the printed circuit board for the Tach but don't want to connect the gauges. I just want to be able to get the dash lights. I do have the original dash plug and can wire it into harness. Is it possible to only get lights on the dash while seperatly wiring the gauges?
__________________
Harry 69' SWB Step Side 1/2 Ton w/68' Front Clip Swap from Leafs to Trailing Arms (Complete) Swap 6 Lug to 5 Lug (w/ Disk Brakes in Front) 3/6 Drop  Help Support The Board Click Here For Information On How To Subscribe Krue's FAQ Page Vendors |
|
|
| Bookmarks |
|
|
Threaded Mode