Door Skin Help needed

[Suicide-D]

I replaced the door skin awhile back and replaced an inner door bottom. I never tacked the skin down or put any seam sealer in it so I could make sure it fit. Well i finally got it on my cab. the door has about a 1/4-inch of twist in it.

twist it one way and it fits good at the bottom and out in the top. this way is the best fit... well the most part of the door is aligned this way.

My question is :

How do I tack this thing and get the door to be square?

I was thinking to tack it at the bottom, then twist the door and tack the top. With it mounted to the cab I can grab the top of the window and pull it in with my leg up against the bottom and i can see it move quite a bit.

How am I suppose to do this? I really don't want to screw this door up... I have put too much time into it already to do that now.


see attatched