Excited for a crew cab build:)

[bikes&bowties]

Its planned that i'll get an 87 k30 crew cab dually. With a 6.2/th400/np205/dana 60. Said to have no rust and only one dent on the bed (doesnt matter you'll see why)

Plans will be to get SRW hubs on the dana 60 and a 14bolt in the rear and lift it 6-8 inches with 37x13.5-17 inch nitto mud terrains (very reasonably priced) with some black/machined Helo 835 wheels... Also 4 inch straight pipe. and trans temp, pyrometer, and tachometer(if i can find a diesel 2 1/16 inch one for a affordable price) gauges in a gauge pod I will put the rubber/vinyl floor liner and sound proofing on the floor. and then a cowl induction hood. Depending how i like the long box and have it set up I may work on short bedding it before painting it. But that is far from decided. I also may turbo is with a 6.5 set up or something else. I dont know much about turbos yet but i have mechanics to turn to and You guys with experience. Or I would start saving for a cummins 12 valve/nv4500 combo...