project " Blue-Ray"

[68 short step]

Originally Posted by 71'tahoe

whats the Manifolds off of? It looks like one would have to add the a/c after the engine is set in place or can you have it on the engine when it goes in? I cant tell from the pics..

Thanks,
Greg

the manifolds are stock truck style...the A/C compressor 'could' be installed with the engine, but the a/c manifolds cant be connect while it goes in...also there is a motor mount bolt that needs to be installed, and the A/C compressor would interfer with doing that...so it would be best to install after the engine is in place and bolted down IMO..

Originally Posted by signgod2

Can you put that 1/4" npt anywhere on the head or just in that location?

just in that location, its the only spot that has a water port in the head..

Originally Posted by signgod2

Is that the a/c that you will use or is that just for mock-up ? I'm gonna ask but did you use the 87' fuel set-up because thats the first year they put feul injected on those style trucks that would fit that style tank ? And you needed that for this set-up of motor? Where does the gas pedal wiring hook up at? sorry so many questions, thats why your the man.

that a/c compressor and manifolds are just my mock-up ones....i used the 87 sending unit because, it was the first year for the intank pump, so it has provisions for a fuel pump....also it is a direct fit in place of the other sending unit.....the gas pedel wiring has two connections, one goes to the pedal itself, and the other goes to the PCM...