Removing wheel cylinders-HELP - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rnemtp3 · 09-09-2010, 10:14 PM

Alright, I have a 68 SWB stepper with 4 wheel manual drums. I am in the process of replacing all the hard brake lines, hoses, etc. as this truck as sat for past few years and the lines have holes all over the place. The problem is the wheel cylinders, I cant get them off. There are no bolts in the back and no clips anywhere either. I have cleaned to the metal all the way around and cant find anything. Do these attach to the bolt above the cylinder where the springs attach? any insight would be great. Thanks

09-09-2010, 10:14 PM	#1
rnemtp3 Registered User Join Date: Mar 2010 Location: Lebanon, VA Posts: 11	Removing wheel cylinders-HELP Alright, I have a 68 SWB stepper with 4 wheel manual drums. I am in the process of replacing all the hard brake lines, hoses, etc. as this truck as sat for past few years and the lines have holes all over the place. The problem is the wheel cylinders, I cant get them off. There are no bolts in the back and no clips anywhere either. I have cleaned to the metal all the way around and cant find anything. Do these attach to the bolt above the cylinder where the springs attach? any insight would be great. Thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.