Installing Early Classic Sway Bar

[Jon M]

Hello everyone,

I am installing an ECE sway bar and having some difficulty. I am wondering if there is a "left and right" to the sway bar and if I have have it in upside down. The "U" clamp that holds the bushing to the lower control arm seems to be a long way from the control arm, and at a severe angle. I had to put a c-clamp on it to draw it down so I could get the bolts in. When I tighten up the bolts the bushing is popping out from under the "U" clamp becuase of the angle of the way bar is so different than the surface of the control arm. Anybody have experience or a picture to post? The ECE instuctions aren't very good.

Thanks!