Adding a Cargo Light - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FlounderGDI · 10-02-2010, 12:22 PM

I've done some searches on here and haven't really come up with any info. Has any one added a Cargo light to a non-cargo light truck?

I recently purchased a light, assembly, wiring, and the chunk of cab to use as a template from a Board Member and I'm wondering how difficult it would be to add one to my 69 CST. I have access to just about any kind of cutting tool except plasma. I was thinking about using a Dremel too to cut out the right sized holes, but I'm curious about how the wiring would run up to the fuse panel.

Any info on this subject would be helpful... Thanks!

10-02-2010, 12:22 PM	#1
FlounderGDI Registered User Join Date: Sep 2009 Location: Lafayette, Indiana Posts: 339	Adding a Cargo Light I've done some searches on here and haven't really come up with any info. Has any one added a Cargo light to a non-cargo light truck? I recently purchased a light, assembly, wiring, and the chunk of cab to use as a template from a Board Member and I'm wondering how difficult it would be to add one to my 69 CST. I have access to just about any kind of cutting tool except plasma. I was thinking about using a Dremel too to cut out the right sized holes, but I'm curious about how the wiring would run up to the fuse panel. Any info on this subject would be helpful... Thanks! __________________ 1969 CST/10 "GreenAndWhite" 1974 Nova (SOLD... End of an Era) 2000 Impala (RIP) 2008 Malibu Brand Loyal... I've never owned a Vehicle not made by Chevrolet.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.