wheels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

skysoldier173rd · 10-03-2010, 07:57 AM

I've looked around and noticed it's quite hard to find aftermarket wheels for the 6 lug pattern on our trucks. Appears due to the fact that the center hole in the wheels we have is larger than most, so even though the wheel lug pattern may be OK, the center hole of most types wont go over the hub center. A guy was telling me that adapater plates are available that move the wheel out enough to not interfere with the part that would stick through the wheel and therefore one could use newer GM wheels or basically anything that had the same 6 lug pattern. Does anyone utilize these or have and info on them?

10-03-2010, 07:57 AM	#1
skysoldier173rd Registered User Join Date: May 2010 Location: jackson, michigan Posts: 246	wheels I've looked around and noticed it's quite hard to find aftermarket wheels for the 6 lug pattern on our trucks. Appears due to the fact that the center hole in the wheels we have is larger than most, so even though the wheel lug pattern may be OK, the center hole of most types wont go over the hub center. A guy was telling me that adapater plates are available that move the wheel out enough to not interfere with the part that would stick through the wheel and therefore one could use newer GM wheels or basically anything that had the same 6 lug pattern. Does anyone utilize these or have and info on them?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.