[PROJECT] Laidout53 Part II - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FnLow69 · 10-03-2010, 11:28 PM

Time for a new frame and link setup on the Dodge. This time im going to make the front crossmember and bag mounts, aswell as Im doing a parallel 4bar and panhard in the rear with bags and hopefully a small cantilever. Going to have sway bars front and rear. This time the running boards will lay out and im going to run 28.5" wide whites (3"). If time permits im going to chop (5") and body work it with some other body mods that I'll mention later when i get there, including custom inner fenders. Also will be doing a full interior. Hope to paint it Navy blue with a medium dark red interior, and flake the motor/trans medium red as well, as long as time permits...

Anyways heres the pictures of the tear down.

Steel for the frame...( three 10' sticks of 2x4 and two 10' sticks of 2x6)

Front clip off...

Bed off...

Cab striped and ready to be removed...

Bare frame....

Bring in the frame table tomorrow and will be starting the frame this coming weekend... more to come.

Justin

10-03-2010, 11:28 PM	#1
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	[PROJECT] Laidout53 Part II Time for a new frame and link setup on the Dodge. This time im going to make the front crossmember and bag mounts, aswell as Im doing a parallel 4bar and panhard in the rear with bags and hopefully a small cantilever. Going to have sway bars front and rear. This time the running boards will lay out and im going to run 28.5" wide whites (3"). If time permits im going to chop (5") and body work it with some other body mods that I'll mention later when i get there, including custom inner fenders. Also will be doing a full interior. Hope to paint it Navy blue with a medium dark red interior, and flake the motor/trans medium red as well, as long as time permits... Anyways heres the pictures of the tear down. Steel for the frame...( three 10' sticks of 2x4 and two 10' sticks of 2x6) Front clip off... Bed off... Cab striped and ready to be removed... Bare frame.... Bring in the frame table tomorrow and will be starting the frame this coming weekend... more to come. Justin __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean Last edited by FnLow69; 10-11-2010 at 11:36 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.