crossmember swap '64 into '60 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hoodrat · 10-09-2010, 01:45 AM

hello, first post here. lots of good info here but i still can't find what i'm looking for. i scored a '64 front end for $40 and put it into my '60. i got 2 bolts per side to line up (the front lower frame bolts) and thats it. now before i start oblonging and drilling holes in my frame can someone tell me if these are the right holes to index the others from? i thought i saw a post somewhere about this but can't find it now. thanks in advance. mark

p.s.- its going to be bagged and very low

10-09-2010, 01:45 AM	#1
hoodrat Registered User Join Date: Mar 2010 Location: los angeles, CA Posts: 1	crossmember swap '64 into '60 hello, first post here. lots of good info here but i still can't find what i'm looking for. i scored a '64 front end for $40 and put it into my '60. i got 2 bolts per side to line up (the front lower frame bolts) and thats it. now before i start oblonging and drilling holes in my frame can someone tell me if these are the right holes to index the others from? i thought i saw a post somewhere about this but can't find it now. thanks in advance. mark p.s.- its going to be bagged and very low Attached Images Last edited by hoodrat; 10-09-2010 at 02:47 AM. Reason: idiot (me) cant spell



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.