NC trailing arms, bed floor, and hood - The 1947 - Present Chevrolet & GMC Truck Message Board Network

redbaron69 · 10-17-2010, 02:09 PM

NO SHIPPING on this stuff just too big and i dont have the time.

nice set of trailing arms minimal rust...125 for the set
steel bed floor some pinholes in the sills and some rot on floor...100
68 GMC hood lip has some rust. surface is nice and straight...75
cowl panels good drivers...20 each
not pictured... 2 in cab gas tanks need cleaned out 10 bucks each, dash out of a 69 non ac radio hole cut 20 bucks, and a set of 6 lug rallys need paint junk tires on them 80 bucks for the set.

10-17-2010, 02:09 PM	#1
redbaron69 Registered User Join Date: Jan 2009 Location: marion nc Posts: 588	trailing arms, bed floor, and hood NO SHIPPING on this stuff just too big and i dont have the time. nice set of trailing arms minimal rust...125 for the set steel bed floor some pinholes in the sills and some rot on floor...100 68 GMC hood lip has some rust. surface is nice and straight...75 cowl panels good drivers...20 each not pictured... 2 in cab gas tanks need cleaned out 10 bucks each, dash out of a 69 non ac radio hole cut 20 bucks, and a set of 6 lug rallys need paint junk tires on them 80 bucks for the set. __________________ 69 short fleet 350/350 "under construction" 70 short step 307/3 speed Last edited by redbaron69; 05-23-2011 at 08:06 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.