Project Daisycutter update....front end disassembled - The 1947 - Present Chevrolet & GMC Truck Message Board Network

superchevy · 06-15-2003, 05:51 PM

Finally got some time and cooperating weather to get the front end of the frame disassembled. Now to clean it and paint with POR-15. I bought another set of upper/lower a-arms and centerlink and already have them cleaned and painted with POR-15. I'll be going back with all new steering and suspension parts that I got from ECE as well as their lowered sway bar kit.
I'll be listing all the front pieces I removed on the parts board if anybody wants them to do a 5 lug disc swap. They're '72 pieces.
Here's a pic:

06-15-2003, 05:51 PM	#1
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	Project Daisycutter update....front end disassembled Finally got some time and cooperating weather to get the front end of the frame disassembled. Now to clean it and paint with POR-15. I bought another set of upper/lower a-arms and centerlink and already have them cleaned and painted with POR-15. I'll be going back with all new steering and suspension parts that I got from ECE as well as their lowered sway bar kit. I'll be listing all the front pieces I removed on the parts board if anybody wants them to do a 5 lug disc swap. They're '72 pieces. Here's a pic: Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.