FS in Dallas: 5 lug disc swap kit.....

[superchevy]

SOLD!!!

I removed all these parts from my '72 shortbed today. Everything is in very good shape - you could bolt on and go - or do I like I did and repaint/refinish/restore one set while you drive, then switch over when you're ready.

You get everything pictured for a complete swap:

Upper and Lower control arms with bushings and balljoints
Spindles with turnable 5-lug rotors and good calipers/pads
Center link with good attached inner and outer tie rods
Idler arm and pitman arm

This is everything you need (less the brake booster/master cylinder) to convert your 67-70 1/2 ton to a 5 lug disc brake front end. You could literally unbolt your front end and bolt this one on if you wanted to.

This stuff is heavy. You might want to pick it up.
If you need it shipped, we could probably do it fairly cheaply ($50-$60??) through Greyhound bus lines to a terminal near you.

$125 plus shipping if needed.

You can email me directly at carpediem_00@yahoo.com